Quick Tips to Finding Hidden Piping and Valves
It is important that you know the details of your home like the back of your hand in case you are a homeowner. One of the things that is especially critical is finding hidden water as well as gas piping and valves and it is important to know where they are especially if you have to deal with things like an emergency. Below are some of the ways that you can be able to find out where the various valves are located.
There is a high probability that the the gas valves for your home will be located before the gas meter in case you have natural gas. Such nubs are usually rectangular in shape and usually use a wrench and gas companies do not recommend touching them. If you are looking for a second valve, then you are most likely to find it down the line or where the gas pipe enters.
There are high chances that the gas pipes you have are made from flexible copper if you own a modern home and the valves are most likely to be located in the utility room. When you have such a piping system you are usually sure that the gas system that you have usually has a high pressure. Such gas systems usually have the shutoff valve near the water heater or the furnace.
When it comes to water meters, you will likely have two shutoff valves one before and the other after the meter as shown on this homepage. In environments where it is really cold you are most likely to get the shut off points located in the house to prevent freezing. The shut off valve is most likely to be located in an underground box or lid next to exterior wall if you live in milder climates.
Take time to look at property reports if you are finding it hard to locate water shut off valve since they are usually indicated in property reports given in the last phase of the property purchase. It is important to look keenly at the report since it will show you where the valve is located. There is also a high probability that the picture of what the valve looks like will be drawn so that you are able to know what it looks like.
With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. For such valves using a metal detector may come in handy since they are usually metallic in nature. It is easy for you to be able to know more info. about where to start when you have a plan even though it may not point out the exact location of the valve.