Finding Similarities Between and Life

The Importance of Colors of Underground Utility Lines

It is now easier to know what an underground utility line is for. The risk was high before when people could not easily identify the type of utility lines underneath whenever they dig. Although not completely eliminated, risks today have been reduced. If there is a need to dig the ground, it is very important that the utility lines first be identified. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. Otherwise it can be something disastrous. Fatal injuries can happen if underground utility lines are struck. It can also interrupt services in your area where the line is located. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. Utility companies can then mark out their respective lines when you call them out.

But, despite the marks, there will sill be accidents. Utility lines are struck every 6 minutes, some place. When this happens, it affects traffic lights, wastewater pipes, telecommunication lines and more. Public heath and safety is affected when this happens.

Companies can locate utility lines through the use of GPR or Ground Penetrating Radar. When locating utility lines underground, this machine makes it easy to do so. Companies can locate their utility lines if any property owner calls 811.

There are certain colors that mark different utility lines for easy identification. Below are some of the colors used for different utility lines.

If you see white lines, then these are proposed excavation sites. It locates areas that will be excavated in the near future.

If you see pink lines, they are temporary survey markings. Surveyors use pink lines to mark off legal property boundaries.

Red lines are used to mark electric power lines, cable, conduit, and lighting cable. The color red is perfect for electric works because it is associated with fire and danger.

Lines for gas, oil, steam, petroleum, and gaseous materials use the color yellow. The bright color yellow is used to be a warning sign since a natural gas leak can create a potentially disastrous situation.

If you see orange lines, then you should associate this with communication., alarm, signal lines, cable or conduit. If you see blue lines then these are lines for potable water. If you see purple lines, that this is for reclaimed water, irrigation and slurry lines. Green lines are used for sewer and drain lines. A project can be derailed for a long time when these utility lines are hit.

You can learn more about the color coding of utility lines if you click here now! You can view here for more.